Roof waterproofing membranes – Applied by spraying
Applying of CONIROOF® waterproofing system includes following stages:
- Careful cleaning and preparation of the base
- Preliminary padding of the surface by adhesive compositions of MASTERTOP® P.
- Spray or manual applying of CONIPUR® M waterproofing membranes
- Applying of CONIPUR® ТС final protection layer.
Coatings applied by spraying
Best solution for jointless waterproofing of composite or large surfaces
- Fire safety – absence of fireworks during applying of membranes
- Applying speed- 20 times faster than placing of conventional roll materials
- Ergonomic – saving on time and working hours: it is not required preliminary cutting
- Jointless coating – absence of bends, welds and laps provides reliable waterproofing even if there are geometrically complicated elements
Coniroof 2103
Coniroof 2103 system meets requirements for reduced combustibility according to regulations of standards DIN 4102, chapter 7 and DIN 4102, chapter 1. It is available for applying in extreme climate conditions, operation period is 25 years.
|
Layer
|
Material
|
Consumption kg/m2
|
|
Padding
|
It is selected subject to base type
|
|
|
Membrane
|
CONIPUR M 803 FL
Two-component, solvent-free, polyurethane membrane with reduced combustibility applied by machine.
|
1,8 – 2,2
|
|
Protection layer
|
CONIPUR TC 459
Single-component, painted, polyurethane coating, stable to ultraviolet radiation
|
0,15 – 0.20
|